Device Drivers for Windows XP 64 Bit & Windows 7, 8 (32 & 64 Bit)

               HOME    |    SITE MAP    |    VIDAR CORPORATE



Device Drivers for Windows XP and Windows 7, 8 (32 and 64 Bit)

For Medical Film Digitizer using Windows XP 64 Bit & Windows 7, 8 (32 & 64 Bit)

  • VIDAR only supports USB 2.0 standard on all drivers and USB capable digitizers.
  • VIDAR supports the following Windows operating systems with the VIDAR Driver 6.0
    • Windows XP Professional Service Pack 3 & 64 Bit
    • Windows 7, 32 & 64 Bit
  • VIDAR supports the following Windows operating systems with the VIDAR Driver 6.1
    • Windows 8, 32 & 64 Bit

Complete instructions for Windows XP and Windows 7 are available in the Setup Guide below:

Complete instructions for Windows 8 are available in the Setup Guide below:

Two options.

  1. Run (open)
  2. Save
  • From the VIDAR website (www.filmdigitizer.com), VIDAR Driver 6.0, run the .exe file or save the .exe file to your desktop or thumb drive (USB stick).
  • If running the driver program from the website the installation shield will start automatically.
  • If saved to your desktop, double click on the .exe file to begin the install shield program. If you first saved the file to a thumb drive, copy the .exe file to the host PC’s desktop and then double click on the .exe to begin the installation shield program.

 

VIDAR Systems Corporation   365 Herndon Parkway   Herndon, VA 20170
Phone +1.703.471.7070    Fax +1.703.471.7665     Toll-free 800.471.7226